ligitek electronics co.,ltd. property of ligitek only LUR3633-PF data sheet doc. no : qw0905-LUR3633-PF rev : a date : 14 - jun. - 2006 super bright round type led lamps lead-free parts pb
30 60 0 75% 50%100% 0 25%25% -30 -60 75% 100%50% 0.5 typ 2.54typ 1.5max 1.0min 25.0min 2.0 13.5 11.0 10.0 package dimensions part no. LUR3633-PF ligitek electronics co.,ltd. property of ligitek only page 1/5 note : 1.all dimension are in millimeter tolerance is 0.25mm unless otherwise noted. 2.specifications are subject to change without notice. directivity radiation + -
unit mw ma ma pd i fp i f 120 120 40 ratings ur parameter power dissipation forward current peak forward current duty 1/10@10khz absolute maximum ratings at ta=25 symbol a ir tstg t opr -40 ~ +100 -40 ~ +85 10 storage temperature operating temperature reverse current @5v typical electrical & optical characteristics (ta=25 ) ligitek electronics co.,ltd. property of ligitek only page 2/5 luminous intensity @20ma(mcd) 22 2200 1100 2.4 max. min. typ. spectral halfwidth nm peak wave length pnm 20 660 forward voltage @20ma(v) min. 1.5 material red gaalas emitted LUR3633-PF part no water clear note : 1.the forward voltage data did not including 0.1v testing tolerance. 2. the luminous intensity data did not including 15% testing tolerance. lens color viewing angle 2 1/2 (deg) part no. LUR3633-PF
ligitek electronics co.,ltd. property of ligitek only 0.0 0.8 f o r w a r d v o l t a g e @ 2 0 m a n o r m a l i z e @ 2 5 r e l a t i v e i n t e n s i t y @ 2 0 m a n o r m a l i z e @ 2 5 wavelength (nm) ambient temperature( ) fig.5 relative intensity vs. wavelength r e l a t i v e i n t e n s i t y @ 2 0 m a 1.0 0.0 600 0.5 -40-20 650700750 -40 80 20 04060100 ambient temperature( ) -20040 20100 80 60 1 f o r w a r d c u r r e n t ( m a ) r e l a t i v e i n t e n s i t y n o r m a l i z e @ 2 0 m a fig.3 forward voltage vs. temperature 0.9 1.0 1.1 1.2 0 1 1.0 1.0 0.5 1.5 2.0 2.5 3.0 1 fig.4 relative intensity vs. temperature forward voltage(v) 3.0 2.04.0 0.0 5.0 0.5 forward current(ma) 100 101000 fig.1 forward current vs. forward voltage typical electro-optical characteristics curve 10 100 1000 ur chip fig.2 relative intensity vs. forward current 2.5 1.5 1.0 2.0 3.0 page 3/5 part no. LUR3633-PF
260 c3sec max 5 /sec max 260 120 temp( c) time(sec) 150 50 100 2 /sec max 25 0 preheat 0 page 4/5 ligitek electronics co.,ltd. property of ligitek only soldering condition(pb-free) 1.iron: soldering iron:30w max temperature 350 c max soldering time:3 seconds max(one time) distance:2mm min(from solder joint to body) 2.wave soldering profile dip soldering preheat: 120 c max preheat time: 60seconds max ramp-up 2 c/sec(max) ramp-down:-5 c/sec(max) solder bath:260 c max dipping time:3 seconds max distance:2mm min(from solder joint to body) 60 seconds max part no. LUR3633-PF
ligitek electronics co.,ltd. property of ligitek only reference standard mil-std-883:1008 jis c 7021: b-10 jis c 7021: b-12 mil-std-750: 1026 mil-std-883: 1005 jis c 7021: b-1 description test condition test item reliability test: 1.ta=105 5 2.t=1000 hrs (-24hrs, +72hrs) the purpose of this is the resistance of the device which is laid under condition of low temperature for hours. 1.ta=-40 5 2.t=1000 hrs (-24hrs, +72hrs) the purpose of this is the resistance of the device which is laid under condition of high temperature for hours. low temperature storage test high temperature storage test 1.under room temperature 2.if=20ma 3.t=1000 hrs (-24hrs, +72hrs) operating life test this test is conducted for the purpose of detemining the resistance of a part in electrical and themal stressed. mil-std-202:103b jis c 7021: b-11 mil-std-202: 210a mil-std-750: 2031 jis c 7021: a-1 mil-std-202: 107d mil-std-750: 1051 mil-std-883: 1011 mil-std-202: 208d mil-std-750: 2026 mil-std-883: 2003 jis c 7021: a-2 1.ta=65 5 2.rh=90%~95% 3.t=240hrs 2hrs 1.t.sol=260 5 2.dwell time= 10 1sec. 1.ta=105 5 &-40 5 (10min) (10min) 2.total 10 cycles the purpose of this is the resistance of the device to sudden extreme changes in high and low temperature. solder resistance test thermal shock test high temperature high humidity test 1.t.sol=230 5 2.dwell time=5 1sec solderability test this test intended to determine the thermal characteristic resistance of the device to sudden exposures at extreme changes in temperature when soldering the lead wire. the purpose of this test is the resistance of the device under tropical for hours. this test intended to see soldering well performed or not. page 5/5 part no. LUR3633-PF
|
